两类整函数的素性

本文就用Nevanlinna理论研究了两类整函数的素性，所得结果推广了Prokopovich和华歆厚的有关定理。     

QUATERNION GENERALIZED SINGULAR VALUE DECOMPOSITION AND ITS APPLICATIONS

This paper derives a theorem of generalized singular value decomposition of quaternion matrices （QGSVD）,studies the solution of general quaternion matrix equation AXB -CYD= E,and obtains quaternionic Roth＇s theorem. This paper also suggests sufficient and necessary conditions for the existence and uniqueness of solutions and explicit forms of the solutions of the equation.     

Separate Polarization Modes Synchronization and Synchronization Switches between Vertical-Cavity Surface-Emitting Lasers

For vertical-cavity surface-emitting lasers (VCSELs) with polarization-rotated feedback, there exist several synchronization types such as synchronizations between total powers and synchronizations between separate polarization modes. Based on the two-mode rate equations, we study and compare numerically the performances of different synchronization types. Our results show that three synchronization types exhibit good performances when their synchronization conditions are satisfied. They are the complete synchronization between total powers, complete synchronization between x-polarized modes, and generalized synchronization between x-polarized and y-polarized modes. The former two types are sensitive to the injection rate and spontaneous emission, while the third type is contrary. Synchronization type with the best performance may switch from one to another, with changing of injection rate and spontaneous emission factor.     

脉冲压缩光栅光路调节新方法研究

介绍了一种简单而实用的大口径脉冲压缩光栅光路调节方法,有效解决了普通光路调节方法中轴向调节精度不高的问题。首先由全息透镜(光栅)成像公式出发,推导出了该光路调节的基本原理。并从光栅记录系统与光栅衍射波像差的关系,结合初级像差理论推导得出叠栅条纹像差为0.4786λ,大约是光栅衍射波像差(0.25λ)的两倍,利用此关系也可对光栅衍射波像差进行实时监测。从数值模拟结果可知,利用叠栅条纹法调节光路可将光栅波像差减至0.06λ,相应的轴向误差量为0.007 mm,可有效提高了轴向调节精度。     

增强型延迟反馈法控制低维混沌系统的解析研究

基于时间延迟反馈控制混沌系统的方法,提出一种增强型控制方案,并利用分析延迟系统产生Hopf分支条件的方法,给出这种方案控制低维连续自治混沌系统时,在达到控制目标的条件下,控制参数的一般解析关系.将这一方案和分析方法应用到两个混沌模型中,结果表明:采用修正的方案可以明显地改善控制混沌的效果和质量;解析分析的结果与实际数值计算的结果一致. 关键词： 延迟反馈 混沌控制 Hopf分支     

两亲性嵌段聚合物的同步辐射小角x射线散射研究

应用同步辐射小角x射线散射(SAXS)方法研究了不同聚合条件下苯乙烯对乙烯基苯甲酸两亲性嵌段聚合物的聚集行为,结果发现该聚合物在选择性溶液中自组装形成胶束.胶束的形态和结构取决于嵌段聚合物的组成、浓度以及溶剂的性质等因素 关键词： 小角x射线散射 两亲性嵌段聚合物 分形维数 粒径     

激光打孔对氮化铝绝缘性能的影响

氮化铝陶瓷具有优良的绝缘和导热性能,是传导冷却超导电力装置绝缘与导热连接件的首选,激光切割是对其进行加工的最有效方法,但激光切割可能对其绝缘性能产生影响,进而影响超导电力装置的安全运行。基于此,通过对激光打孔前后氮化铝基片孔周区域绝缘电阻的测量、金相结构和扫描电镜成分的比较,分析了激光打孔对氮化铝绝缘性能的影响,并总结了选用氮化铝基片作为超导电力装置电流引线的绝缘与导热垫片应注意的问题。     

ICP-AES测定葡萄糖酸钙中Pb、As、Cd等9个杂质元素

本文应用ICP-AES直接测定了葡萄糖酸钙中的Pb、As、Cd等9个杂质元素,对样品的消解方法、基体和酸介质的影响等进行了讨论.用基体匹配法消除钙基体的干扰,9个杂质元素测定的测定范围为:Pb 0.0008%-0.08%,Cu、Mg 0.0001%-0.01%,其余元素0.0003%-0.03%.加标回收率为95.8%-100.0%,相对标准偏差为0.16%-3.61%.     

Investigation of laminar plasma remelting/cladding processing

Investigation of remelting and cladding processing with laminar plasma jets on several metals has been conducted looking for possible development of a new surface modification technique. The remelting tests illustrated that the new method could evidently improve the material microstructure and properties of cast iron. The cladding was done with Al₂O₃ ceramic powder on stainless steel. The energy dispersive spectra (EDS) analysis was used to determine the distribution of the major cladding element in the plasma-processed layers, for which the microstructure observations and hardness measurements were also performed.